latin tools | Sales and Repair Charlotte NC

LATIN TOOLS - SALES AND REPAIR TOOLS

Call us:(704) 529-0229

Top quality tools repair

Compressors

Latin Tools Company Charlotte NC

A gas compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor. Compressors are similar to pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe.

Ver Informacion

Framing - Nails Gun

Latin Tools Company Charlotte NC

A nail gun, nailgun or nailer is a type of tool used to drive nails into wood or some other kind of material. It is usually driven by electromagnetism, compressed air (pneumatic), highly flammable gases such as butane or propane, or, for powder-actuated tools, a small explosive charge. Nail guns have in many ways replaced hammers as tools of choice among builders.

Ver Informacion

Roofing - Nails Gun

Latin Tools Company Charlotte NC

Some full head nail guns, especially those used for pallet making and roofing, use long plastic or wire collated coils. Some strip nailers use a clipped head so the nails can be closer together, which allows less frequent reloading. Clip head nails are sometimes banned by state or local building codes. Full Round Head nails and ring shank nails provide greater resistance to pull out.

Ver Informacion

Generators

Latin Tools Company Charlotte NC

An engine-generator is the combination of an electrical generator and an engine (prime mover) mounted together to form a single piece of equipment. In many contexts, the engine is taken for granted and the combined unit is simply called a generator.

Ver Informacion

Siding - Nails Gun

Latin Tools Company Charlotte NC

Siding and wall cladding is the exterior material applied to the walls of a house or other building meant to shed water, protect the walls from the effects of weather, insulate, and is a key in the aesthetics of the structure. Some walls such as solid brickwork and masonry veneer are not covered with siding, but some buildings such as log buildings can have siding added.

Ver Informacion

Finish - Nails Gun

Latin Tools Company Charlotte NC

The next sizes are 16 and 15 gauge (1.63 and 1.83 mm diameter). These are generally referred to as "finish nails". They come in lengths between ⅝ and 2½ in. (16 to 64 mm) and are used in the general fixing of much softwood and MDF trim work (such as baseboard/skirtings, architraves, etc.) where the holes will be filled and the work painted afterwards.

Ver Informacion

Our Tools and Sales repair service area

appliance repair Charlotte NC

Tools Repair Uptown Charlotte NC

✓ Mecklenburg County ✓ Catawba County ✓ Lincoln County
✓ Gaston County ✓ York County ✓ Iredell County ✓ Rowan
✓ Cabarrus County ✓ Stanly County ✓ Union County

appliance repair Charlotte NC

Tools Repair Urban Area Charlotte NC

✓ Mecklenburg County ✓ Catawba County ✓ Lincoln County
✓ Gaston County ✓ York County ✓ Iredell County ✓ Rowan
✓ Cabarrus County ✓ Stanly County ✓ Union County

appliance repair Charlotte NC

Tools Repair Rural Area Charlotte NC

✓ Mecklenburg County ✓ Catawba County ✓ Lincoln County
✓ Gaston County ✓ York County ✓ Iredell County ✓ Rowan
✓ Cabarrus County ✓ Stanly County ✓ Union County